Nikken

Amon Ra presentation

Elbo Controlli-NIKKEN Amon Ra-TW Presetter

E46LTW features overview

Elbo Controlli-NIKKEN E46LTW Tool Presetter

Lyndex-Nikken -Hathor Six A Presetter Presentation

Elbo Controlli-NIKKEN Hathor SIX Tool Presetter

Lyndex-Nikken -E460N Presetter Introduction

Elbo Controlli-NIKKEN E460N Tool Presetter

Lyndex-Nikken -E236N Presetter Introduction

Elbo Controlli-NIKKEN E236N Tool Presetter

4th Axis Table

CNC105/CNCZ105 Compact Rotary Table

Nikken’s complete line of CNC Rotary Tables is recognised worldwide for wear-resistance, rigidity and
high-speed capabilities. Every component is designed & built to provide unrivalled high accuracy, increased
production and a trouble-free long life

• Table size range (diameter): ø105mm to ø200mm.
• Suitable for a wide range of applications from a small drilling machine with simple indexing to full CNC positioning on machining centers in high production.
• Designed for indexing and rotational milling on a wide variety of workpieces.
• Various options are available to meet all work-holding, fixturing & chucking requirements.
• Available in Standard and High-Speed (Z) Models.

Specifications

Specifications

Code / Item Number CNC105 CNCZ105
Diameter of Table ømm 105 105
Diameter of Spindle Hole ømm ø60 X ø30 ø60 X ø30
Centre Height mm 105 105
Width of T Slot mm ø10H7 Pin Hole ø10H7 Pin Hole
Clamping System   Air Air
Clamping Torque N.m 205 205
Table Inertia at Motor Shaft kg m2x10-3 0.06 0.06
Servo Motor min-1 1/5000i . 2000 1/5000i . 2000
MIN. Increment   0.001° 0.001°
Rotation Speed min -1 22.2 44.4
Total Reduction Ratio   1/90 1/45
Indexing Accuracy sec ±30 ±30
Net Weight kg 30 30
MAX Work Load on the Table    
Vertical kg 30 30
Horizontal kg 60 60
MAX Thrust Load applicable on the Table N 8800 8800
(F X L) N.m 65 65
(F X L) N.m 220 220
MAX Work Inertia [Vertical] kg m2 0.04 0.02
Driving Torque N.m 36 27

Nikken NCT200/NCTZ200 Compact Rotary Table

Nikken’s complete line of CNC Rotary Tables is recognised worldwide for wear-resistance, rigidity and high-speed capabilities. Every component is designed & built to provide unrivalled high accuracy, increased
production and a trouble-free long life.

The NCT200 features a detachable faceplate system to provide versatility, a larger worm wheel for increased performance and the latest generation motors for simpler integration. The table provides much improved accuracy and a clamping torque of 900Nm, from a 200mm diameter table, the new NCT is the compact rotary to beat!

Specifications

Specifications

Code / Item Number NCT200 NCTZ200
Diameter of Table ømm 200 200
Centre Height mm 135 135
Width of T Slot mm 12 12
Clamping System   Air Air
Clamping Torque N.m 900 900
MIN. Increment   0.001° 0.001°
Rotation Speed min -1 33.3 66.6
Total Reduction Ratio   1/90 1/45
Indexing Accuracy sec ±20 ±20
Net Weight kg 65 65
MAX Work Load on the Table    
Vertical kg 100 100
Horizontal kg 200 100
Driving Torque N.m 144 115
 
 
 
 

Nikken CNC260/CNCZ260 Heavy Duty Rotary Table

Nikken’s complete line of CNC Rotary Tables is recognised worldwide for wear-resistance, rigidity and high-speed capabilities. Every component is designed & built to provide unrivalled high accuracy, increased
production and a trouble-free long life.

The CNC260 is the most versatile 4th Axis Rotary Table Nikken Kosakusho has ever produced.

Manufactured to the very highest standards in our factory in Osaka, this table is commonly used on a wide range of vertical machining centres to provide 4th axis capabilities at a 
minimal cost.

The table can be installed with a standard air brake or can be equipped with a hydraulic braking system which virtually triples the clamping torque to a massive 1568 Nm.

Whatever your fourth axis requirement, this table’s versatility could be just the solution you need to make the most of your machining centre.

Specifications

Specifications

Code / Item Number CNC260 CNCZ260
Diameter of Table ømm 260 260
Diameter of Spindle Hole ømm Ø80H7 Ø80H7
Centre Height mm 170 170
Width of T Slot mm 12 12
Clamping System   Air / Hyd Air / Hyd
Clamping Torque N.m 588 / 1568 588 / 1568
Table Inertia at Motor Shaft kg m2x10-3 0.33 0.33
Servo Motor min-1 4/4000i . 2000 4/4000i . 2000
MIN. Increment   0.001° 0.001°
Rotation Speed min -1 16.6 33.3
Total Reduction Ratio   1/120 1/60
Indexing Accuracy sec 20 20
Net Weight kg 120 120
MAX Work Load on the Table    
Vertical kg 175 175
Horizontal kg 350 350
MAX Thrust Load applicable on the Table N 25480 25480
(F X L) N.m 984 984
(F X L) N.m 3332 3332
MAX Work Inertia [Vertical] kg m2 3.2 1.6
Driving Torque N.m 192 153
 
 

5th Axis Trunnion Tables

Nikken 5AX-100 Compact 5th Axis Rotary Table

Nikken’s complete line of CNC Rotary Tables is recognised worldwide for wear-resistance, rigidity and high-speed capabilities. Every component is designed & built to provide unrivalled high accuracy, increased
production and a trouble-free long life.

The proven tightening power of the Nikken Ultra-Lock™ Milling Chuck is applied to the brake of the tilting axis of our 5AX-tilting rotary table.
• Virtually eliminates vibration at any tilting angle.
• Provides necessary rigidity for heavyduty operations, including heavy drilling and face milling.

Specifications

Specifications

Code / Item Number 5AX-100
Diameter of Table ømm ø90
Diameter of Spindle Hole ømm ø50H7
Centre Height mm 135
Table Height mm 190
Axis   Rotary Tilting (0o~105o)
Clamping System   Pneumatic Air Hydraulic
Clamping Torque N.m 205 410
Table Inertia at Motor Shaft kg m2x10-3 0.09 0.12
Rotation Speed min -1 44.4 22.2
Total Reduction Ratio   1/45 1/90
Net Weight kg 84
MAX Work Load on the Table (0° to 30°) kg 40
MAX Work Load on the Table (30° to 90°) kg 20

Nikken 5AX-201 Compact 5th Axis Rotary Table

Nikken’s complete line of CNC Rotary Tables is recognised worldwide for wear-resistance, rigidity and high-speed capabilities. Every component is designed & built to provide unrivalled high accuracy, increased
production and a trouble-free long life.

The proven tightening power of the Nikken Ultra-Lock™ Milling Chuck is applied to the brake of the tilting axis of our 5AX-tilting rotary table.
• Virtually eliminates vibration at any tilting angle.
• Provides necessary rigidity for heavyduty operations, including heavy drilling and face milling.

 

Specifications

Specifications

Code / Item Number 5AX-201
Diameter of Table ømm 200
Diameter of Spindle Hole ømm ø60H7 x ø50
Centre Height mm 180
Width of T Slot mm 12
Axis   Rotary Tilting (0o~105o)
Clamping System   (Air*) Hydraulic (Air*) Hydraulic
Clamping Torque N.m (303*) 588 (303*) 612
Table Inertia at Motor Shaft kg m2x10-3 0.11 0.16
Servo Motor min-1 2/5000 · 2000 4/5000 · 2000
MIN. Increment   0.001° 0.001°
Rotation Speed min -1 22.2 16.6
Total Reduction Ratio   1/90 1/120
Indexing Accuracy sec 20 60
Net Weight kg 160
MAX Work Load on the Table (0° to 30°) kg 60
MAX Work Load on the Table (30° to 90°) kg 40
MAX Thrust Load applicable on the Table Tilting Angle =0° 9800N
Tilting Angle =0° L= 100mm F=4900N
Tilting Angle =90° L1=0mm F1=5880N
L2=100mm F2=2940N
Tilting Angle =90° FxL = 382Nm
MAX Work Inertia [Vertical] kg m2 0.5
Driving Torque N.m 72
 

Nikken Pre-setters

Elbo Controlli-NIKKEN E236N Tool Presetter

Our new E236N Tool Presetting machine has been developed as the entry level option for our new generation of advanced tool presetting machines.

Designed to be bench mounted the E236N features a ground granite base and column, stainless steel construction and ergonomic design combined with a 5.7" TFT LCD Touch Screen. This system provides full operator control and selection of options and functions via an intuitive icon system allowing operational and functional simplicity that is second to none.

The precision spindle system is fully interchangeable and utilises a one piece cartridge - eliminating the need for adaptors and the errors associated with their use.

Also included with our E236N model is our DPP software package. Working via your DNC system DPP converts measured tool data into CNC code for direct loading into the machine controller and associated tool offset pages (First twenty uses free - Dongle option).

Specifications

Specifications

Measuring range: diameter max. 260mm (radius 130mm); height max. 360mm

High precision ground granite base and column

Machine structure in steel offering high mechanical resistance and long life..

Supplied with ISO / BT Interchangeable rotating spindle-holder (HSK/CAPTO/VDI available as options).

Double vault arc prismatic slideways.

Double re-circulating ball bearing slides lubricated for life.

Manual mechanical braking of the interchangeable spindle-holder rotation.

Constant load Archimedean spiral spring (as opposed a mass counter-balance system).

Vision-system for tool measuring including:
• Full Colour TFT LCD Touch screen – 90mm x 120mm, magnifications about 20X.
• C-MOS sensor 0.001 resolution – Framed image area 5mm x 5mm VGA System.

Machine operator interface through:
• TFT 5,7” colour Touch Screen.

Standard software:
• 9 CNC machine origin management and adapters.
• 9 Tool lists (99 tools per list).
• DPP Post Processor universal generator.

ELBO CONTROLLI Linear Transducers in optical glass type SLIDE 371 certified HP laser:
• Axes resolution: X= 1µm, Z= 1µm.
• Anti-dust cover provided for when not in use.
• Overall dimensions: Length = 512mm, Height = 827mm, Depth = 406mm 

Elbo Controlli-NIKKEN E460N Tool Presetter

The increased cross section and size of the column gives added stability up to 600mm and this theme is continued with revised axis carriages that also deliver increased reliability. The mechanical axis brake and control system have been completely updated from the previous model and finally, and most noticeably, the original pendant & operator panel are now combined in to one single touch screen system that is located away from the camera and column.

The latest E460N Tool Presetting machine has been developed as the second level option for our new generation of advanced tool presetting machines.

Designed to be bench mounted the E460N features a ground granite base and column, stainless steel construction and ergonomic design combined with a TFT 15” colour touch screen. The Touch Screen provides full operator control and selection of options and functions via an intuitive menu system - these new electronics provide operational and functional simplicity that is second to none. One major new feature of the E460N is the ability to rotate the spindle/tool through 360 degrees and the presetter automatically saves and displays the maximum radius/diameter and length for the tool.

The precision spindle system is fully interchangeable and utilises a one piece cartridge (backward compatible with the previous E450N model) - eliminating the need for adaptors and the errors associated with their use. The new system also provides a vacuum clamping system for positive location and security of the tool location within the spindle.

Also included with our E460N model is our TdSIX software package. Working via your DNC system, TdSIX converts measured tool data into CNC code for direct loading into the machine controller and associated tool offset pages.

The system also includes a Post Processor utility which enables tool offsets to be instantly converted into the correct code to suit numerous CNC machine toolcontrollers.

Unlike similar systems numerous Post Processor variations are included within the system as standard. All are customisable and editable to meet individual machine requirements.

Specifications

Specifications

Measuring range: diameter max. 400mm (radius 200mm); height max. 600mm

Mechanics/electronics/optics standard equipment:

- Machine structure in stainless-steel offering high mechanical resistance and long life.
- Base and column made of natural granite: linearity max error 4μm/Mt – certification with
- Taylor Hobson res. 1 μm/Mt. electronic millesimal level.
- ISO/BT Interchangeable rotating spindle-holder (size to be specified)
- max run-out error < 4μm.
- Double vault arc prismatic slideways: 2 for X axis slideways, 1 for Z axis slideway.
- 3 x Double re-circulating ball bearing slides, lubricated for life (preloaded slides/slideways: P/H class).
- Pneumatic mechanical braking of the interchangeable spindle-holder rotation.
- Constant load Archimedean spiral spring (as opposed a mass counter-balance system).
- Vision-system for tool measuring and cutting inspection including:
- C-MOS sensor – Framed image area 6.4 x 6.4mm.
- Magnifications about 30X.
- Telecentric lens.
- Doublet lenses at low F/Number in order to eliminate the error of the clearness circle.
- Episcopic illuminator with ring lens and red LED’s; diascopic illuminator with red, puntiform light LED.

Machine operator interface through:

- TFT 15” colour Touch Screen.
- Intel Atom D.C. fanless motherboard
- UBUNTU LINUX operating system.
- Data storage on solid state disk SSD.
- X and Z axes block management with control maximum speed of translation 2mm/sec.
- Standard software:
- CNC machine origin management and adapters.
- Tool list creation and/or single tool.
- TdSIX software built-in to manage:
- Tools sets and Post Processor universal generator.
- Magnetic chip code-holders (Balluff for example, hardware not included).
- Multi-cutting tools.
- ELBO CONTROLLI Linear Transducers in optical glass type SLIDE 371 certified HP laser
- Axes resolution: X= 1μm, Z= 1μm.
- Anti-dust cover provided for when not in use.
- Overall dimensions: Length = 1070mm, Height = 1140mm, Depth = 595mm.

Elbo Controlli-NIKKEN Hathor SIX Tool Presetter

The Hathor SIX Tool Presetting machine is designed completely free-standing on its own integral base; Hathor SIX features ground granite and stainless steel construction combined with a large digital camera and touch screen menu system – these new electronics provide operational and functional simplicity that is second to none.

The precision spindle system is fully interchangeable and utilises a one piece cartridge - eliminating the need for adaptors and the errors associated with their use. Incorporated within the spindle is our innovative universal mechanical clamping system with electronic tool clamping confirmation.

Also included with our Hathor SIX model is our TdSIX software package. Working via your DNC system, TdSIX converts measured tool data into CNC code for direct loading into the machine controller and associated tool offset pages.

The Hathor SIX is the second of three models which are manufactured to order. For a more prompt delivery of a stock machine the E346i, E460N, Kyhan and Amon Ra, as our four standard models, are always readily available directly from the Euro Centre.

Specifications

Specifications

Measuring range: diameter max. 400mm (radius 200mm); height max. 600mm

- Mechanics/electronics/optics standard equipment:
- Machine structure in stainless steel offering high mechanical and long life, floor mounted with
- self-levelling supports in non-deformable steel.
- Base and column made of natural granite: linearity max error 2μm/Mt – certification with
- Taylor Hobson res.1μm/Mt. electronic millesimal level.
- ISO/BT Interchangeable rotating spindle-holder (size to be specified) max run-out error < 2μm.
- Double vault arc prismatic slideways : 2 for X axis slideways, 1 for Z axis slideway.
- 3 x Double re-circulating ball bearing slides, lubricated for life (preloading slides/slideways: P/H class).
- Spindle-holder with motorized tool-clamping system.
- Universal mechanical tool clamping (standard pull-studs) managed via software.
- Control via software with sensor of empty for the exact position between the tool-holder axis and the machine spindle axis, no error of concentricity.
- Pneumatic-mechanic braking of the spindle-holder rotation with radial compensation of the clamping force: no axis angular run error.
- Constant load Archimedean spiral spring (as opposed to a mass counter-balance system).
- Vision-system for tool measuring and cutting inspection consisting of:
- C-MOS sensor – Framed image area 6,4 x 6,4 mm
- Magnifications about 30X.
- Telecentric lens.
- Doublet lenses at low F/Number in order to eliminate the error of the clearness circle.
- Episcopic illuminator with ring lens and red LED’s ; diascopic illuminator with red, puntiform light LED.
- Machine operator interface through:
- TFT 15” colour Touch Screen. - Intel Atom D.C. fanless motherboard
- UBUNTU LINUX operating system.
- Data storage on solid state disk SSD.
- X and Z axes block management with control maximum speed of translation 2mm/sec.
- Standard software:
- CNC machine origin management and adapters.
- Tool list creation and/or single tool.
- Automatic change of CNC machine origin allocation
- TdSIX software built-in to manage:
- Tool sets and Post Processor universal generator.
- Magnetic chip code-holder (Balluff for example, hardware not included).
- Multi-cutting tools.
- ELBO CONTROLLI Linear Transducers in optical glass type SLIDE 371 certified HP laser
- Axes resolution: X= 1μm, Z= 1μm.
- Anti-dust cover provided for when not in use.
- Overall dimensions: Length = 1240mm, Height = 1840mm, Depth = 558mm.
- Case Studies

Elbo Controlli-NIKKEN 66B/68B Tool Presetter

Our 66B/68B Tool Presetting machines has been developed as the 'entry level' higher spec option for our advanced tool presetting machines. Compared to the lower E346i and E460N models the construction and design offers considerable advantages:

- Designed to be completely free-standing on its own integral base; the 66B/68B features ground granite and stainless steel construction combined with a large digital camera and touch screen menu system – these new electronics provide operational and functional simplicity that is second to none.

- The high precision spindle system is fully interchangeable and utilises a one piece cartridge with full mechanical tool clamping (pneumatically drawing the tool pullstud into the taper cone) - eliminating the need for adaptors and the errors associated with their use. The construction of this system has to be 'seen to be believed' and is more akin to a machine tool spindle than a tool presetter spindle!

- All axis movements on the 66B/68B are servo controlled with absolutely no operator contact with the column. This drastically increases machine accuracy and repeatability over similar machines which incorporate the movement via a manual handle mounted on the column.
 
FEATURES & BENEFITS:

Also included with the 66B/68B models is our TdSix software package. Working via your DNC system, TdSix converts measured tool data into CNC code for direct loading into the machine controller and associated tool offset pages.

The 15" Colour Touch Screen on the 66B/68B is part of the UBUNTU Linux Operating System that includes the ability to zoom in at 30 x magnification via the high resolution camera.

Specifications

Specifications

Mechanics/electronics/optics standard equipment:

- Machine structure in stainless steel offering high mechanical and long life, floor mounted with
- adjustable supports in non-deformable steel.
- Base and column made of natural granite: linearity max error 2μm/Mt – certification with
- Taylor Hobson res.1μm/Mt. electronic millesimal level.
- ISO/BT Interchangeable rotating spindle-holder (size to be specified) max. run-out error < 2μm.
- Double vault arc prismatic slideways : 2 for X axis slideways, 1 for Z axis slideway.
- Double re-circulating ball bearing slides, lubricated for life, X axis = 3, Z axis = 2 (preloaded slides/slideways: P/H class).
- Universal mechanical tool clamping (standard pull-studs).
- Pneumatic-mechanic braking of the spindle-holder rotation with error radial compensation of the
- Clamping force: no axis angular run error.
- Constant load Archimedean spiral spring (as opposed to a mass counter-balance system).
- Vision-system for tool measuring and cutting inspection consisting of:
- C-MOS sensor – Framed image area 6.4 x 6.4 mm
- Magnifications about 30X.
- Telecentric lens.
- Doublet lenses at low F/Number in order to eliminate the error of the clearness circle.
- Episcopic illuminator with ring lens and red LED’s: diascopic illuminator with red, puntiform light LED.
- Machine operator interface through:
- TFT 15” colour Touch Screen. - Intel Atom D.C. fanless motherboard
- UBUNTU LINUX operating system. - Data storage on solid state disk SSD.
- Standard software:
- CNC machine origin management and adapters.
- Tool list creation and/or single tool.
- TdSIX software built-in to manage:
- Tool sets and Post Processor universal generator.
- Case Studies

Elbo Controlli-NIKKEN E46LTW Tool Presetter

Our E46LTW is a completely new model for 2016 redesigned and reengineered from the ground up! The brand new concept ergonomic platform is completely free-standing on its own integral base; the NEW E46LTW features oversized ground granite and stainless steel construction combined and equipped with a 22’’ HD touch-screen monitor. The touch screen system is innovatively portrait mounted for easy viewing and operation. The screen layout and simple to use icon based software design, which is spilt into two distinct sections, not only displays visible images of the current tool and profile, but additionally allows access to the full functionality and new capabilities of the software and integral tool management system.

The precision spindle system is fully interchangeable and can accommodate cartridges for all types of machine tapers covering HSK, ISO, VDI, BT CAPTO, etc. Incorporated within the spindle is our innovative universal mechanical clamping system with electronic tool clamping confirmation.

The innovative, Ubuntu 14.04 LTS LINUX based, software system features automatic recognition of the spindle via SP-ID (NFC - Spindle Identification System). This system allows the Presetter to identify each spindle cartridge as it is loaded and pinpoints or suggests the correct machine origins, whenever the spindle is changed.

The Presetter features numerous outputs including several USB ports and a network capability. This allows for the transfer of post processed tool offset data from the tool management system, via a network or even memory stick, to the numerical control of individual machine tools(depending on both the network and CNC controller capability).

The E46LTW is equipped with the original camera as on the E46L model (providing the normal tool measurement along with inspection and geometry capabilities from the front) but in addition a secondary high resolution swivel camera (60X magnification with, in addition, 2X and 4X digital zoom capability) to allow and facilitate detailed inspection and geometry functions from both the side and top of the tool profile. This additional capability is particularly useful not only for CNC machinists but also benefits tool manufacturers to precisely measure linear and geometrical features of the tool profile.

Specifications

Specifications

- Measuring range: diameter max. 320 mm (radius 160 mm), height max. 600 mm.
- Machine structure in steel offering high mechanical durability and long life, floor mounted with 3 fixed support and 1 adjustable support in steel, equipped with keyboard and monitor adjustable support.
- Base and column made of natural granite: linearity max error 2 µm/Mt - certification with Taylor Hobson res.1 µm/Mt. electronic millesimal level.
- ISO / BT / HSK / VDI………. etc. Interchangeable rotating spindle-holder (to be specified) max run-out error < 2 µm.
- Double vault arc prismatic slideways: n°2 X axis slideways, n°1 Z axis slideways.
- Double re-circulating ball bearing slides, lubricated for life (4) (preloading slides/slideways: P/H class).
- Universal mechanical tool clamping managed via software (ISO/BT tools only).
- Tool-holder taper connection control (run-out test, ISO/BT tools only).
- Pneumatic-mechanic brake of the spindle-holder rotation with radial compensation of the clamping force: no axis angular run error.
- Constant load Archimedean spiral spring (as opposed to a mass counter-balance system).
- Machine operator interface through:
- Full HD LCD 22” colour Touch-Screen monitor
- Intel I3 Quad Core Processor
- UBUNTU 14.04 LTS LINUX operating system
- Data storage on solid state disk SSD
- X and Z axes block management with control maximum speed of translation 2mm/sec
- 4 USB ports (keyboard, mouse, Dymo printer and one spare) and 1 LAN port
- Standard Software:
- CNC machine origin management and adapters
- Tool list creation and/or single tool
- Automatic change of CNC machine origin allocation
- Tools set and Post Processor universal generator
- Magnetic chip code-holders (Balluff for example, hardware not included)
- Printable tool set report
- Theoretical measurements and tolerances management
- Main Camera: tool measurement (diascopic) and cutting-edge inspection (episcopic):
- Bi-telecentric lens
- Optical doublets at low F/Number in order to eliminate the error of the clearness circle
- Magnification 26X, digital zoom 2X and 4X available
- C-MOS sensor 1,3 Mega pixels, USB 2.0 high speed connection
- Framed image area 10 x 10 mm (3 times bigger than standard values)
- Episcopic illuminator with ring lens and red lens, diascopic illuminator with puntiform light red
- Second/Third Camera: cutting-edge inspection (episcopacy) with on screen measurement:
- Bi-telecentric lens
- Opportunity to view the tool from the top (front) or from the side (chest). Thanks to the rotating support by 90° degrees, the camera can be removed from above not to obstruct the measurement operations.
- Magnification 60X, digital zoom 2X and 4X available
- C-MOS sensor 1,3 Mega pixels, USB 2.0 high speed connection
- Framed image area 4 x 4 mm (3,9 µm/pixel)
- Illuminator: episcopic ring with diffused light and low angle: reducing glare caused by tool surface characteristic 
- ELBO CONTROLLI Linear Transducers in optical glass type SLIDE 371 certified HP laser
- Axes resolution: X= 1 µm, Z= 1 µm
- Anti-dust cover provided for when not in use.
- Overall dimensions : L= 1237 mm, H= 1874 mm, P= 646 mm
- Net weight: 265 kg

OPTIONS:

- Spindle index in four angular positions: 0°-90°-180°-270°
- C axis display spindle body and spindle-holder
- Spindle-holder Identification System (SP-ID), mounted on the spindle body
- Spindle-holder Identification System (SP-ID) for additional spindle-holder, mounted on the interchangeable spindle
- Case Studies

Elbo Controlli-NIKKEN Amon Ra-TW Presetter

This top of the range tool presetting machine has been developed as a more cost effective equivalent to competitor tool inspection machines.

Completely free-standing on its own integral base; Amon Ra-TW features ground granite and stainless steel construction. All movements are servo drived guaranteeing ultimate precision. The single high-definition screen is linked to two outstanding optical cameras with digital zoom capabilities. The system employs industrial PC architecture providing operational and functional simplicity that is simple to learn and even incorporates additional capabilities focussed specifically on tool geometry.

The patented precision spindle system is fully interchangeable and utilises a one piece cartridge - eliminating the need for adaptors and the errors associated with their use. Incorporated within the spindle is an innovative universal pneumatic clamping system.

Integrated within the innovative software package is a complete tool management system and network port. Working via your DNC system this can convert measured tool data into CNC code for direct loading into your machine controller and associated tool offset pages. Also included with the system as standard is full WI-FI connectivity.

Further capabilities, on both cameras, include the ability to import and export .dxf CAD profiles for detailed checking and comparison on the full high-definition 23” screen.

90 degree swivel secondary camera system (TWin)

- The innovative 90º swivel secondary camera system allows any cutting tools to be viewed from the top (tool end) and also from the side of the tool
- It is possible to measure the tool in the traditional manner with the traditional first camera and then to check / inspect the geometry of the tool at up to an incredible 70x zoom with the second swivel camera
- Using digital enhancements on both cameras it is possible to achieve digital zoom of 56x  & 112x on the first camera plus 140x and 280x on the secondary swivel camera

Specifications

Specifications

600 - Measuring range: diameter max. 520mm (radius 260mm); height max. 600mm

800 - Measuring range: diameter max. 520mm (radius 260mm); height max. 800mm

- Machine structure in stainless-steel offering high mechanical resistance and long life, floor mounted with self-levelling supports in non-deformable steel, equipped of adjustable supports for monitor, keyboard and mouse with cable conduits.
- Base and column made of natural granite: linearity max error 2 µm/Mt - certification with Taylor Hobson res.1 µm/Mt. electronic millesimal level.
- ISO / BT / HSK / VDI / CAPTO etc. Interchangeable rotating spindle-holder (to be specified) max run-out error < 2 µm.
- Lubricated for life double re-circulating ball bearing slides
- Universal mechanical tool clamping managed via software.
- Pneumatic-mechanic brake of the spindle-holder rotation with radial compensation of the clamping force: no axis angular run error.
- Constant load Archimedean spiral spring (as opposed to a mass counter-balance system).
- Single widescreen monitor for the images reading out and the measure function management:

- Tools measure and cutting inspection:
• 23" Full HD Widescreen Monitor (on the column support).
• C-MOS sensor 1,3 Mega pixels, USB 2 link High speed Area framed image 12,8 x 10 mm (4 times as great as the standard).

- Measure management and machine operator interface:
• Celeron M® Processor on Industrial Main Board architecture.
• Operating system : Ubuntu LINUX.
• Keyboard.
• Mouse.

- Software standard:
• Tool set compiler and Post Processor universal generator.
• CNC machine origin management and adapters.
• Tool list creation and/or single tool, even multi-cutting.
• Automatic change of CNC machine origin allocation.
• Reading/writing module on magnetic chip code-holders (Balluff for example, hardware not included).
• Tool images shooting in inspection and its rescue in graphical format.

- Vision System:
• Camera One - 28 x optical magnification, 1.3 megapixel CMOS sensor (10 x 10)
• Camera Two (swivel) - 70 x optical magnification, 1.3 megapixel CMOS sensor (4 x 4), 3.9 µ m / pixel
• Both cameras have a digital zoom

- ELBO CONTROLLI Linear Transducers in optical glass type SLIDE 371 certified HP laser
• Axes resolution: X= 1 µm, Z= 1 µm

- Anti-dust cover provided for when not in use.
- Overall dimensions : L= 1873 mm, H= 1960 mm, D= 687 mm

Nikken 'On-machine' Solutions

Nikken provide numerous options for manual machine based measurements and workpiece setting. Over the years we have become the pioneer for many solutions and devices to suit these precise applications.

HEIGHT PRESETTER - HP

The Nikken height presetter is designed not only as a fast effective setting gauge for workpieces and tools alike but can also be used and an aid to measuring and adjusting boring systems or reamers e.t.c.

As versatile on a lathe as it is on a machining centre the HP series effectively eliminates the need for test cutting and allows your operations to run smoothly directly after the initial setting.

Our height presetters are available in three variants; Mechanical types HP100 & HP150 for any application along with the compact HP50K which relies on conductivity between the workpiece and tool being measured.

3D SENSOR - UMT or UNIVERSAL MICRO TOUCH

Our Micro-Touch system enables instantaneous detection of a workpiece or component by means of a red lamp indicator and audible 'beep'. Originally the system relied on conduction (effectively the Micro_touch makes a circuit with a metallic component/part) however; this limitation has now been completely eliminated by the introduction of our new 'X' type version.

The UMTX adopts its own revolutionary 'internal contact system' which makes it ideal for non-conductive workpieces or applications. Operation is identical to the standard UMT without the restrictions or limitations of material or component.

MICRO STAND - UDS

Our Micro stand is the ideal base to mount your dial test indicator for clocking or aligning you parts or equipment.

The system features two arms which incorporate a ball joint mechanism at both ends of the assembly. This design effectively allows complete freedom of movement in any direction such as vertical, lateral, longitudinal or rotational. If the arm is outstretched horizontally it is capable of effectively reaching up to 300mm.

Locking is provided by a simple hand wheel which instantly and effectively fixes the position of the arm. The ball joint system makes the Micro stand the quickest and easiest to use system on the market.

TOUCH POINT SENSOR - TP

Our Touch point sensor is a highly sensitive position sensor. Effectively the system is very simple to use and operates by lighting an indicator light the moment the contact ball is very slightly deflected from its housing.

As with the UMT the system works by conduction so is only suitable for metallic contact applications.

Nikken Angle Heads

Alberti Standard Angle Heads

Alberti design, manufacture and provide high quality precision angle heads for manufacturing companies seeking the highest productivity and performance.

The company's whole goal and structure is targeted to meet the demands of a discerning niche market worldwide and to offer optimum standard or custom-made solutions to their customers.

Alberti began production in 1986 and within only a few years their products and solutions have come to dominate the international marketplace. This is simply due to the quality, functionality and reliability of their products.

Nikken Europe is delighted to be able to add these products and developments to their portfolio for customers around Europe to take full advantage from.

The products are designed and developed to exacting standards and feature:

• Cast Iron bodies (GS600) 100% machined
• Body provides long life, thermal stability and stress resistance
• Where possible, single piece input spindles for better accuracy & performance
• Special gear material (200kg/mm) with four-key drive system
• Double high precision, preloaded, angular contact bearings
• Special low friction sealing system with double mechanical seal
• All units supplied complete with accessories inside protective carry case

Specifications

Specifications

PRODUCT RANGE

LINEA CONTROLT90
90 Degree single output angular head

• Output spindles: ER8 up to ER40
• Max. Torque: 2Nm up to 75Nm
• Max. Axial Load: 38 to 1,750Nm
• Max. RPM: 4,000 up to 6,000
• Gear Ratio: 1 to 1

LINEA CONTROL T90 2U 
90 Degree twin output angular head (others available)

• Output spindle: ER32
• Max. Torque: 35Nm
• Max. Axial Load: 1,250Nm
• Max. RPM: 4,000
• Gear Ratio: 1 to 1

LINEA CONTROL TCU 
0 to 90 Degree single output adjustable angular head

• Output spindles: ER20 up to ER32
• Max. Torque: 6Nm up to 32Nm
• Max. Axial Load: 450 to 4,000Nm
• Max. RPM: 4,000
• Gear Ratio: 1 to 1

LINEA CONTROL MODULAR 
0 Degree single output modular angular head

• Output spindles: ER8 up to ER32
• Max. Torque: 2Nm up to 40Nm
• Max. Axial Load: 38 to 4,000Nm
• Max. RPM: 4,000 up to 6,000
• Gear Ratio: 1 to 1
• Adjustable and alternative output options available

LINEA TR90 
90 single output compact angular head

• Output spindles: ER16 up to ER32
• Max. Torque: 8Nm up to 40Nm
• Max. Axial Load: 330 to 980Nm
• Max. RPM: 2,500 up to 3,000
• Gear Ratio: 1 to 1

LINEA TA45 
45 Degree single output angular head

• Output spindles: ER16 up to ER32
• Max. Torque: 7Nm up to 35Nm
• Max. Axial Load: 250 to 1,250Nm
• Max. RPM: 3,500 up to 4,000
• Gear Ratio: 1 to 1

LINEA P 
Large capacity angular head

• Wide choice or options and output configurations
• Standard 90 degree & 90 degree rotatable versions
• Call for further details

For further information on standard Alberti products or any of our spindle optimisation products please contact the Euro Centre,

 

 

Mimatic Standard Angle Heads

The Mimatic program of Standard Angular Heads provides Nikken Europe customers with the means for complete, integrated machining. It is now no longer necessary to repeatedly relocate tools and components which provide a considerable reduction in production costs.

This also allows rationalisation and an increase in flexibility for the entire production process.

Mimatic Angular Heads not only increase the efficiency of your production but also allow potentially inaccessible areas within housings or bores to be reached.

Mimatic products are compatible with all types of machine tool (manual through to full CNC tool changing).

The units adopt quality construction and components throughout:

• Solid and precise anodised external castings
• High concentricity and High Rigidity
• Ground bevel gears with helical profiles as well as hardened and ground spur gears to ensure smooth operation and high power transmission
• Stabilised spindle bearings
• Permanent internal lubrication
• Friction-optimised seals with PTFE sealing lips for higher speeds and temperature resistance
• Numerous coolant options (internal/external/centre etc)

Numerous input spindle options are available as standard including SK,ISO,BT,HSK,CAPTO.

 

Specifications

Specifications

MODELS

SW-13 
90 Degree single output angular head

• Output spindles: ER16 up to ER40
• Max. Torque: 12Nm up to 150Nm
• Max. RPM: 5,000 up to 8,000
• Gear Ratio: 1 to 1

DW-17 
90 Degree twin output angular head

• Output spindles: ER25 up to ER40
• Max. Torque: 30Nm up to 150Nm
• Max. RPM: 4,000 up to 8,000
• Gear Ratio: 1 to 1

ZW-12 
90 Degree single output offset angular head

• Output spindles: ER25 up to ER40
• Max. Torque: 30Nm up to 150Nm
• Max. RPM: 5,000 up to 8,000
• Gear Ratio: 1 to 1

ZWS-14 
90 Degree single output offset slim angular head

• Output spindles: ER20 up to ER32
• Max. Torque: 15Nm up to 70Nm
• Max. RPM: 6,000 up to 10,000
• Gear Ratio: 1 to 1

WS-19 
0-98 Degree single output adjustable angular head

• Output spindles: ER20 up to ER32
• Max. Torque: 15Nm up to 70Nm
• Max. RPM: 5,000 up to 8,000 (12,000 up to 15,000)
• Gear Ratio: 1 to 1 (1 to 2,25)

For further information on the Mimatic standard range or any of our spindle optimisation products please contact the Euro Centre.

 

 

Mimatic Special Angle Heads

Mimatic are able to provide a complete design and development service to offer angle heads and accessories to suit any application or component.

This further allows rationalization and an increase in flexibility for the entire production process.

Mimatic special angle heads provide further capabilities over the standard range in that they allow full customisation of the unit and process to suit complex and otherwise difficult workpieces that would probably be normally considered inaccessible.

Of course a simple variation on a standard unit is also considered special and the same high degree of quality manufacture and components is applied custom units.

From extended length, multi-spindle or machine specific right down to compact or complicated angle units - any application or requirement is always considered.

About Company

Our clients range from FTSE companies, to large organisations and some small local businesses who are striving to expand.

To see a detailed list of our works and the progress please see our project page.

Cape Town Office

25 Mail Street, Western Province Park, Epping, Cape Town, 7460
+27 21 534 5351
FAX: +27 21 534 3374

Johannesburg Office

Corner of Atlas and Templehof South Road, Bonaero Park, Johannesburg
+27 11 970 7005
FAX: +27 86 678 9360