FA30-S WEDM

WEDM - MITSUBISHI

FA30-S WEDM

 
Model FA10, FA20, FA30
Machine dimensions 1575 x 1667 x 1930mm, 2013 x 2632 x 2100mm, 2560 x 2650 x 2150mm
Machine unit weight 2000kg, 3500kg, 4600kg
Max. Workpiece Weight 500kg, 1500kg, 3000kg
Table Dimension (WxD) 590 x 514mm, 780 x 630mm, 1100 x 875mm
Table height (from floor) 900mm
Table rapid-feed speed 1300mm/min
Travel path (U/V) ±32mm, ±32mm, ±75mm
Travel path (X/Y/Z): 350 x 250 x 220mm, 500 x 350 x 300mm, 750 x 500 x 350mm
Z-axis device Standard equiment (=5.axis)
Taper 15°/100 mm 15°/100 mm
Max. taper angle 15° (bei Werkstückhöhe 260mm)
Taper machining device Standard equiment (=3. And 4.axis)
Useable Wire diameter 0,2 ~ 0,3

Designed for workpieces of up to 4 tonnes. There is little else we need to say regarding the rigidity and stability. Furthermore, there is the high-resolution digital controlled direct drive system
(0.05 µm resolution) and a generously dimensioned ballscrew, including 10 years warranty on positioning accuracy. Both features guarantee continuous precision over an extremely long working life. The table for workpiece clamping, with its vertical slidingdoor has been ergonomically designed with the operator in mind. Ease of maintenance is a core design feature demonstrated by the patented self-cleaning system of the working tank seal plate as well as the fully automatic central lubrication system. These are only a few examples of the intelligent design applied to Mitsubishi´s latest FA-Series machine. Needless to say
quality is also important to us, and all FA machines are checked by laser measurement, roundness tests and extensive controls among other things. Because precision needs perfection.

The FA-S Advance generates outstanding, precise results - not only under laboratory conditions, but also in dayto-day activities. After all, this is ultimately the decisive factor for you. Astonish your customers with exceptional results and reasonable prices made possible by the most progressive technology and low operating costs. Surface finishes of less than 0.15 µm Ra, cutting speeds up to 500 mm2/min, and parallelism from 5 µm on the diameter at a cutting height of 200 mm are achievable. The FA-S Advance continues to work reliably even in the most difficult flushing conditions such as conic angles up to 45°, offset or intermittent workpieces, thereby delivering precise and lasting results that are reproducible. 

 

Brochures

Product Enquiry

About Company

Our clients range from FTSE companies, to large organisations and some small local businesses who are striving to expand.

To see a detailed list of our works and the progress please see our project page.

Cape Town Office

25 Mail Street, Western Province Park, Epping, Cape Town, 7460
+27 21 534 5351
FAX: +27 21 534 3374

Johannesburg Office

Corner of Atlas and Templehof South Road, Bonaero Park, Johannesburg
+27 11 970 7005
FAX: +27 86 678 9360